Posts

GoHighLevel AI automation illustration: a simple three-step workflow diagram with Follow-up, Review and Onboard nodes joined by arrows, each labelled AI draft, you approve

A lot of small businesses I talk to are paying for GoHighLevel every month and using a fraction of it. The pipeline is there, the calendars are there, the workflow builder is there. But the follow-up sequences never got written, the review requests go out when someone remembers, and new clients still get a welcome email typed from scratch.

That’s not a software problem. It’s a writing and setup problem, and that’s exactly where AI helps. In this post I’ll walk you through why GHL accounts stay half set up, then three jobs you can hand to AI first: follow-up sequences, review requests after the job, and a client onboarding checklist. Then I’ll show you how to test it all before you switch anything on.

Quick note: I’m independent and not affiliated with or endorsed by HighLevel. GoHighLevel and HighLevel are trademarks of their owner.

Why GoHighLevel accounts stay half set up

GoHighLevel can do a lot. That’s the selling point, and it’s also the problem. When a tool can do everything, someone has to decide what it should do for your business, write the words, build the steps and keep them up to date. In most small businesses, that someone is the owner, and the owner is busy running the business.

Here’s what I usually see when I open up an account:

  • Empty or default workflows. The account was set up by an agency or a course template, and nobody has touched the workflows since.
  • Generic messages. The follow-up texts that do exist were written for “any business”, so they don’t sound like you and customers can tell.
  • Stages nobody uses. The pipeline has stages, but jobs don’t get moved, so any automation tied to those stages never fires.
  • Fear of breaking something. Owners worry that if they switch a workflow on, it’ll spam their customer list. So they leave it off.

The good news: the hardest part of all of this is the writing and the thinking, and AI is very good at both. You can get the words and the logic drafted in an afternoon, then put them into GHL piece by piece.

HighLevel has its own AI too

It’s worth knowing what’s already built in. HighLevel’s support portal describes a Workflow AI Builder that turns a plain-language prompt into a workflow you then review and refine, and Conversation AI bots that can collect lead details, answer common questions and help with booking. HighLevel’s own guide says generated workflows need a manual review before you publish them, which is good advice for any AI setup. Features and pricing depend on your plan, so check your account before you rely on them.

Whether you use HighLevel’s built-in AI or an outside assistant like ChatGPT, Claude or Grokbot, the same rule applies: you still need to know what you want it to say and when. That’s what the rest of this post is about.

Job 1: AI-written follow-up sequences

Most quotes and enquiries that go cold weren’t lost. Nobody followed up. A follow-up sequence in GHL fixes that, but only if the messages are good enough that you’re happy for them to go out.

Decide the cadence first

Keep it simple. A day 1, day 3 and day 7 rhythm works for a lot of service businesses: a quick check-in, a helpful nudge, then a polite last message that makes it easy to say no. Write down when the sequence should stop, for example as soon as the person replies, books, or says they’ve gone elsewhere.

Get AI to draft the messages in your voice

Give your AI assistant three or four real messages you’ve sent before, a short description of your business and your service area, and the cadence. Ask it to write each message for SMS and email, short and friendly, with one clear next step. Then edit them until they sound like you. I cover the tone side in more detail in my post on how to follow up leads with AI without being pushy.

Personalise with the fields you already have

GHL lets you insert contact fields into messages. Ask the AI to use the ones you actually fill in, such as first name, service type and suburb. A follow-up that mentions “the bathroom quote in Ashgrove” lands very differently to “your recent enquiry”. (That’s an example, not a real customer.)

Job 2: Review requests after the job

Happy customers rarely leave a review unless you ask, and asking feels awkward. A simple automated request, sent at the right moment, takes the awkwardness out of it.

Trigger it on the win

Tie the request to a clear moment, such as a job being marked complete or an invoice being paid. If your pipeline stages aren’t kept up to date, fix that first, or the request will go out at the wrong time or not at all.

Write a short, personal ask

Ask the AI for a two or three line message that thanks the customer for something specific, then gives them the link. No pressure, no incentives, no long story. Ask for a second version for the reminder a few days later, and stop after that.

Ask everyone, not just the happy ones

Don’t set up a workflow that only sends the review link to people who rate you highly and sends everyone else somewhere else. That’s called review gating and it goes against Google’s review policies. Ask every customer, and handle any complaints that come back as a person, not a bot. My post on getting more Google reviews with AI goes through this step by step.

Job 3: A client onboarding checklist

When a deal is won, the next few days set the tone for the whole relationship. If onboarding happens in your head, things get missed: the access you needed, the forms they never filled in, the kick-off call nobody booked.

Write the checklist once

Tell your AI assistant what happens after someone says yes in your business, even in rough dot points. Ask it to turn that into a clean checklist with three parts: what the client needs to send you, what your team needs to do, and when each step should happen. You only have to do this once.

Turn it into messages and tasks

From that checklist, get the AI to draft the welcome email, a short reminder for anything the client hasn’t sent yet, and the internal tasks for your team. In GHL, these can hang off the “won” stage: the welcome goes out, tasks are created and assigned, and a reminder follows if a form is still missing. For more on this, see how to onboard new clients with AI.

Test everything before you switch it on

This is the step most people skip, and it’s the one that stops the “what if it spams everyone” fear from coming true.

Use a test contact

Create a contact with your own mobile and email, and run them through every workflow. Read every message as if you were the customer. Check the timing, the personalisation fields and the links.

Check the stop rules

Reply to a follow-up as your test contact and make sure the sequence stops. Move the test deal to won and check the follow-up ends and onboarding starts. These are the bits that cause the most embarrassment when they’re wrong.

Start small

Switch on one workflow for new contacts only, not your whole list. Watch it for a week. Look at what went out, what people replied and anything that looked off, then fix the wording or the logic before you add the next one.

Keep a person in the loop for the tricky stuff

Decide what must always go to a human: pricing questions, complaints, anything legal or sensitive. If you’re unsure about the data side, my post on whether AI is safe for small business covers what to check.

What to do this week

  1. Pick one job. Follow-up, reviews or onboarding. Choose the one that costs you the most work today.
  2. Write your rules in plain English. Your services, area, tone, cadence and what always goes to a person.
  3. Get AI to draft the messages. Use your own past messages as examples, then edit until they sound like you.
  4. Build it in GHL and test it on yourself. One workflow, one test contact, every message read end to end.
  5. Switch it on for new contacts only. Review after a week, then add the next job.

If you’d rather start with the instructions already written, the free CRM agent pack for GoHighLevel gives you AI agents for lead replies, follow-ups and pipeline updates. They’re plain-English instructions that work with ChatGPT, Claude, Grokbot or any AI assistant, so there’s nothing to install.

FAQ

Do I need to know how to build workflows to use AI with GoHighLevel?

No. AI can draft the messages and describe the steps in plain English, and HighLevel’s own Workflow AI Builder can turn a prompt into a workflow. You still need to review every step and test it before you switch it on.

Will AI send messages to my customers without me checking?

Only if you set it up that way. Start by testing every workflow on your own contact, switch it on for new contacts only, and keep pricing, complaints and anything sensitive with a person.

Can I only send review requests to happy customers?

No. Filtering out unhappy customers before asking for a review is called review gating and goes against Google’s review policies. Ask every customer and handle complaints personally.

Should I use HighLevel’s built-in AI or ChatGPT, Claude or Grokbot?

Either can work. Many businesses draft messages and checklists in their usual AI assistant, then build them in GHL. Check what your HighLevel plan includes before relying on its built-in AI features.

What’s the best first job to automate in GoHighLevel?

Whichever one loses you the most work today. For many service businesses that’s quote follow-up, because the leads are already in the pipeline and just need a nudge.

Make GoHighLevel finally run itself

Grab the free CRM agent pack: AI agents for lead replies, follow-ups and pipeline updates, with no weekend workflow building. Prefer a hand? Book a free 15-minute AI workflow audit and we’ll find your first quick win.

Get the free CRM agent pack or book a free AI audit

Independent AI agents. Not affiliated with or endorsed by HighLevel.

HubSpot AI agents illustration: a generic CRM pipeline board with New lead, Contacted, Follow-up and Won columns, where the Follow-up column glows with an AI sparkle and AI draft ready labels

If you’re paying for HubSpot every month and still typing notes after every call, chasing quotes from memory and onboarding new clients with a copy-pasted email, you’re not alone. A CRM is only as good as what goes into it, and for most small businesses the bit that goes in is the bit nobody has time for.

The good news is you don’t need a bigger plan or a new system to fix it. You can hand the repetitive writing and chasing to AI agents and keep HubSpot as the place where everything lives. In this post I’ll show you what HubSpot already does well, where the gaps usually are, three jobs to give AI first, where the AI actually sits, and how to keep your data clean while you do it.

Quick note: I’m independent and not affiliated with or endorsed by HubSpot. HubSpot is a trademark of HubSpot, Inc.

What HubSpot does well (and where the gaps are)

HubSpot is very good at being the single source of truth for your contacts, deals and conversations. You can see who enquired, what stage their deal is at, which emails they opened and who on your team is responsible. For a small business, that alone is a big step up from a spreadsheet and a full inbox.

HubSpot also has its own AI now. Its Breeze Assistant page says Breeze Assistant is included with every HubSpot subscription at no extra cost, and its AI agents page describes pre-built agents and an agent builder. Some of those features need a Starter, Professional or Enterprise subscription, and custom agents use HubSpot Credits, so check what your plan includes before you count on them.

So where are the gaps? In my experience they’re rarely about features. They’re about the work around the CRM:

  • Replies are slow. A new enquiry lands in HubSpot, but someone still has to write the first reply, and that person is on the tools or with a client.
  • Follow-up depends on memory. Quotes go out and nobody chases them, because the follow-up tasks pile up faster than anyone clears them.
  • Onboarding is ad hoc. Every new client gets a slightly different welcome, and the details you need from them arrive in dribs and drabs.
  • Records go stale. Notes don’t get logged, deal stages don’t get moved, and the pipeline report stops matching reality.

None of those are HubSpot problems. They’re time problems, and they’re exactly the sort of repetitive, text-heavy jobs AI is good at.

Three jobs to hand to AI first

Don’t try to automate your whole CRM in one go. Pick one of these, get it working, then add the next.

1. The first reply to a new lead

When a lead comes in, an AI agent can read the enquiry and draft a friendly, specific reply based on your services, service area and pricing rules. You check it and send it, or for simple enquiries you let it go out once you trust it. The reply then gets logged against the contact in HubSpot so everyone can see it.

The key is giving the agent good information: what you do and don’t do, the areas you cover, how you price, and when it must hand over to a person. I go into the details in my post on replying to every enquiry fast with AI.

2. Follow-up on quotes and quiet deals

Most deals that go cold weren’t lost. Nobody followed up. An AI agent can look at deals that have sat in the same stage for a few days and draft a short, personal follow-up using the notes on that deal. A simple cadence such as day 1, day 3 and day 7 works for a lot of businesses, and the agent should stop as soon as the person replies or says no.

Because the drafts come from the deal notes, they don’t read like a template. If you want the full approach, see how to follow up leads with AI without being pushy.

3. Onboarding new clients

When a deal moves to won, an AI agent can draft the welcome email, a checklist of what you need from the client, and the first few tasks for your team. It pulls the client’s name, the job and any special notes from the HubSpot record, so each welcome feels personal without you writing it from scratch.

Where the AI actually sits

This is the part that confuses people, so let me keep it simple. There are two common ways to set this up, and you can start with the first and move to the second later.

Option A: AI drafts, you paste into HubSpot

You keep your AI assistant open beside HubSpot. You paste in the enquiry or the deal notes, the assistant drafts the reply or follow-up, you check it and paste it into HubSpot to send or log. It sounds basic, but it’s the fastest way to start, it costs nothing extra, and you stay in full control of every message.

This is how the Steal My AI Agents pack works. Each agent is a set of plain-English instructions you load into ChatGPT, Claude, Grokbot or any AI assistant, so there’s nothing to install.

Option B: AI connected to HubSpot

Once the drafts are reliably good, you can connect the AI to HubSpot so it reads new records and writes notes, tasks or drafts straight back. That might be through HubSpot’s own agents, or an AI assistant that’s been given access to your account. Either way, the same rule applies: start with the agent creating drafts and tasks for a person to approve, and only let it act on its own once you’ve tested it on real examples.

Guardrails that apply either way

  • Decide what the AI may never send without a person checking it, such as pricing, complaints or anything legal.
  • Give it a clear hand-over rule: if it isn’t sure, it flags the record for a human.
  • Only give it access to the data it needs for the job.

If you’re weighing up the data side, my post on whether AI is safe for small business covers what to check.

Keeping your data clean

AI is only as good as the records it reads. If your contacts have no notes and your deal stages are a guess, the drafts will be generic. A few habits make a big difference:

Agree on your deal stages

Write down what each stage means in one line, for example “Quote sent: the quote has been emailed and we’re waiting on a yes or no”. When everyone uses the stages the same way, an agent can safely pick out the deals that need chasing.

Log a short note after every conversation

Even two lines helps: what they want, what you promised, and the next step. You can dictate a rough note and have AI tidy it into a clean summary before it goes into HubSpot. I cover this in how to keep your CRM up to date with AI.

Use the fields you already have

Service type, suburb and lead source are usually enough for an agent to personalise a message. Fill those in consistently before you add more custom fields.

Review weekly

Spend ten minutes a week looking at what the agent drafted and what actually went out. Fix the instructions when something’s off. That small habit is what turns a clever experiment into something your team relies on.

What to do this week

  1. Pick one job. First reply, follow-up or onboarding. Choose the one that costs you the most time or the most lost work.
  2. Write down your rules. Services, areas, pricing basics, tone, and what must always go to a person.
  3. Run it in your AI assistant for a week. Paste in real enquiries or deal notes, check every draft, and log what you send in HubSpot.
  4. Tidy the records it relies on. Agree on your deal stages and start logging short notes.
  5. Decide on the next step. If the drafts are consistently good, look at connecting the AI to HubSpot or adding the next job.

If you’d like the instructions already written, the free CRM agent pack for HubSpot gives you agents for lead replies, follow-ups and keeping records complete on the plan you already have.

FAQ

Do I need a higher HubSpot plan to use AI agents?

Not to get started. You can run AI agents in your own AI assistant and paste the results into HubSpot on any plan. HubSpot’s own agents and agent builder have their own plan and credit requirements, so check HubSpot’s pricing pages for your account.

Will AI send messages to my customers without me knowing?

Only if you set it up that way. Start with the AI creating drafts that a person checks and sends. Once you trust it on simple messages, you can decide which ones, if any, it may send on its own.

Is it safe to paste customer details into an AI assistant?

Use a business account with data controls switched on, share only what the job needs, and check the provider’s privacy settings. Avoid pasting sensitive information such as health or financial details unless your setup is approved for it.

Should I switch CRMs to get better AI?

Usually not. Switching costs time and money, and the gaps are rarely the CRM itself. Adding AI to the work around HubSpot, such as replies, follow-ups and notes, is normally the quicker win.

What’s the best first job to give AI in HubSpot?

Whichever one loses you the most work today. For many small businesses that’s following up quotes, because the deals are already in the pipeline and just need a nudge.

Get more out of HubSpot without upgrading

Grab the free CRM agent pack: AI agents for lead replies, follow-ups and complete records that work with the HubSpot plan you already have. Prefer a hand? Book a free 15-minute AI workflow audit and we’ll find your first quick win.

Get the free CRM agent pack or book a free AI audit

Independent AI agents. Not affiliated with or endorsed by HubSpot.

Illustration of a CRM contact record card with every field, from what the customer needs to the next step, filled in and ticked, next to the headline Keep your CRM up to date with AI

You paid for a CRM because someone told you it would keep every lead, every client and every deal in one place. And it can. The catch is that it only knows what somebody types into it. After a long day on calls, in meetings or on the tools, nobody feels like writing up notes, updating the deal stage and setting a follow-up task. So the CRM slowly turns into a very expensive contact list with half the details missing.

The usual reaction is to blame the software and start shopping for a new one. In my experience that’s rarely the real problem. The problem is that nothing is feeding the CRM you already have.

In this post I’ll show you how to use AI to keep your CRM up to date without switching systems: turning messy call notes into clean records, catching leads that have gone quiet, and keeping deal stages honest. You can start today with copy and paste in ChatGPT, Claude, Grokbot or any AI assistant, then automate more once you trust it.

Why your CRM is always out of date

When I sit down with small business owners and open up their CRM, I usually see the same patterns:

  • Blank or half-filled contact records. A name and a phone number, but no notes on what they wanted, what was quoted or what happens next.
  • Deals stuck in the wrong stage. A job that was won three weeks ago is still sitting in “Quote sent”, so the pipeline tells you nothing useful.
  • No next step. Leads with no follow-up task, so they only get chased if someone happens to remember.
  • Notes living everywhere else. The real detail is in someone’s notebook, a text thread or their head.

None of this is laziness. Data entry is boring, it happens at the worst possible time (straight after a call, when the next one is already ringing), and nobody sees the benefit until months later. That’s exactly the kind of work AI is good at taking off your plate.

Why switching CRMs usually doesn’t fix it

Moving to a new CRM feels like a fresh start. But you’d be spending weeks migrating data, rebuilding pipelines and retraining the team, and the new system would still rely on the same people typing in the same notes at the end of the same busy days. Six months later you’re back where you started, just with a different logo on the screen.

The better question isn’t “which CRM should we use?” It’s “what is going to keep our CRM updated?” That’s where an AI assistant, and later an AI agent, comes in.

What AI can do for your CRM

Think of AI as the admin person who sits next to your CRM and does the typing. There are three jobs it does well.

1. Turn messy notes into clean records

After a call, you jot down a few rough lines or record a quick voice memo. The AI turns that into a tidy summary with the fields your CRM actually uses: what they need, budget if mentioned, timeframe, decision maker, objections, and the agreed next step with a date. You paste it straight into the contact or deal.

2. Catch the leads that have gone quiet

Once a week, export your open leads or deals (most CRMs let you export a list to a spreadsheet) and ask the AI to flag anything with no activity for a set number of days or no next step booked. You get a short list of who to chase, plus a suggested follow-up message for each one.

3. Keep deal stages honest

Give the AI the same export and your stage definitions, and ask it to point out deals that look like they’re in the wrong stage based on the notes. A deal with a signed quote in the notes but still marked “Contacted” gets flagged for you to fix.

Notice that in all three jobs the AI suggests and you decide. It doesn’t need a login to your CRM to be useful on day one.

How to set it up this week (no integrations)

Here’s the simplest way to start. It takes about half an hour to set up and a few minutes a day after that.

Step 1: Write down what a “complete” record looks like

Open your CRM and list the fields that actually matter to your business. For most small businesses it’s something like: contact details, source (how they found you), what they need, value of the job, stage, last contact date, and next step with a date. Keep it short. If a field never gets used, leave it out.

Step 2: Give your AI assistant a standing brief

Most AI assistants let you save instructions in a project, custom GPT or similar. Paste in something like this and adjust it to suit:

You help me keep my CRM up to date. When I paste in rough notes from a call, email or meeting, turn them into a CRM update with these fields: Contact, Source, What they need, Estimated value, Stage, Last contact date, Next step and date, Notes (three lines max). Only use information in my notes. If something isn’t mentioned, write “not provided”. Never guess numbers or dates. Finish with one line suggesting the next action if I haven’t given one.

The “only use information in my notes” line matters. Without it, AI tools can fill gaps with confident-sounding guesses, and a CRM full of made-up details is worse than a blank one.

Step 3: Use it straight after every call

Make it a habit: hang up, paste your rough notes or a voice-to-text transcript into the assistant, copy the result into the CRM. It’s thirty seconds of work instead of five minutes of typing, which is the difference between it happening and not happening.

Step 4: Run a weekly pipeline check

Once a week, export your open deals and paste them in with a prompt like:

Here are my open deals. List any with no activity in the last 7 days or no next step booked, and any that look like they’re in the wrong stage based on the notes. For each one, give me a one-line reason and a short, friendly follow-up message I could send. Don’t invent any details that aren’t in the data.

Work through the list, update the CRM and send the follow-ups you’re happy with. If you want help writing follow-ups that don’t sound pushy, I covered that in how to follow up leads with AI.

When to move from copy-paste to an AI agent

Copy and paste is the right place to start because you get to see exactly what the AI produces and fix the brief before anything runs on its own. Once you trust the output, the next step is an AI agent that does the same jobs without you in the middle: picking up new enquiries, writing the notes into the record, setting the follow-up task and flagging stale deals each week.

Whether that’s possible depends on your CRM and your AI tools. Many CRMs have an API or built-in automation, and some AI assistants can connect to other apps. That’s the part worth getting right with someone who has done it before, because a badly set up agent can create a mess in your data just as fast as it fixes one. My advice: automate one job at a time, starting with the one you hate most, and keep a human check on anything that goes out to a customer.

Keep customer data safe

Your CRM is full of personal information, so treat it carefully when you bring AI into the picture.

  • Check your AI tool’s data settings. Use a business plan where possible and turn off any option that lets the provider train on your data. The OAIC has practical guidance on privacy and the use of commercially available AI products that’s worth a read, and it recommends not entering personal information into publicly available AI tools where you can avoid it.
  • Share only what’s needed. For a pipeline check, the AI rarely needs phone numbers or home addresses. Remove columns you don’t need before you paste.
  • Accuracy is part of the job. Under the Australian Privacy Principles, businesses covered by the Privacy Act need to take reasonable steps to keep the personal information they hold accurate, up to date and complete (see the OAIC’s APP quick reference, APP 10). A tidy, current CRM helps with that, as long as the AI isn’t guessing.

Common mistakes to avoid

  • Letting the AI guess. If a budget or date wasn’t mentioned, it should say so. Check the first few weeks of updates closely.
  • Tracking too many fields. Ten fields nobody fills in are worse than five that are always right.
  • Automating before the habit exists. Get the copy-paste routine working first. An agent built on a process nobody follows just automates the chaos.
  • Sending follow-ups without reading them. The AI drafts, you decide. Your name is on the message.

Frequently asked questions

Do I need to switch CRMs to use AI?

No. This approach works with the CRM you already have, whether that’s HubSpot, GoHighLevel or something else. You start with copy and paste, so it doesn’t matter which system you use.

Which AI tool should I use?

Whichever one you already use. The briefs above work in ChatGPT, Claude, Grokbot or any AI assistant. A clear brief and honest notes matter more than the brand of tool.

How long does it take each day?

About thirty seconds after each call to paste in your notes and copy the update back, plus fifteen minutes or so for the weekly pipeline check. Setting up the brief takes around half an hour.

Can AI update my CRM automatically?

Often, yes, but it depends on your CRM and your tools. Start manually so you can check the output, then automate one job at a time once you trust it.

Is it safe to put customer details into AI?

Share only what’s needed, use a business plan with training on your data turned off, and follow the OAIC’s guidance on commercially available AI products. If in doubt, remove names and contact details before pasting.

Want AI agents working on your CRM?

I set up AI agents that sit on top of the CRM you already pay for, handling the notes, follow-ups and pipeline updates so your team can get back to selling. No migration.

See how it works

Want to try it yourself first? Grab my free Steal My AI Agents pack, which works with ChatGPT, Claude, Grokbot or any AI assistant. Or book a free AI audit.